Training project
IOT HOUSE – ADVENT CALENDAR WITH AUTODESK FUSION AND ARDUINO
23 lessons from the first sketch to control via the Arduino Cloud
Request a quoteOpen 3D model in Autodesk Fusion
- Original Fusion model
- Learning tasks in the MLS learning system
What it is about
A small house made of wood, 3D-printed parts and electronics as a learning series behind 24 doors: design in Autodesk Fusion (sketch, extrude, revolve, top-down, bottom-up, standard parts), generative design and a sheet metal alternative, electronics with schematic, PCB layout and 3D board, animation, rendering, drawings, CAM milling, 3D printing, cooling simulation, soldering and connection to the Arduino Cloud.
Learning objectives
- Design parts in Autodesk Fusion with sketch, extrude and revolve.
- Distinguish and apply top-down, bottom-up and hybrid design.
- Set up generative design and compare it with a sheet metal alternative.
- Create schematic, PCB layout and 3D board and solder the board.
- Control a microcontroller via the Arduino Cloud.
AI mentor
This project is available in the AI mentor as 25 missions, from getting started through the parts to the review. With a licence the AI mentor tailors the tasks to you.
Lessons
- 01
Door 1: project introduction and overview of the Advent calendar
You get to know the IoT house training project and what the 24 doors will cover.
- 02
Door 2: software: Autodesk Fusion and Arduino IDE
You set up the software: Autodesk Fusion for CAD, CAM and CAE and the Arduino IDE for programming the microcontroller, and learn the difference between education and personal licences.
- 03
Door 3: 3D modelling basics: sketch and extrude
You create sketches as the starting point of a 3D model and turn 2D profiles into solid bodies with Extrude.
- 04
Door 4: modelling with Revolve: a Christmas tree
You use Revolve to create a rotationally symmetric part, the Christmas tree, including fillets and holes.
- 05
Door 5: preparing generative design: brackets
You model brackets with constraints and mirroring as the base geometry for generative design.
- 06
Door 6: first steps in generative design: goals and constraints
You define preserve and obstacle geometry, structural constraints and loads so that Autodesk Fusion can generate design options.
- 07
Door 7: top-down design: the house front
You create the house front from existing geometry, so changes to the overall model carry through to the part.
- 08
Door 8: bottom-up design: the base plate
You design the base plate with its holes as a separate part and then assemble it.
- 09
Door 9: hybrid design: combining top-down and bottom-up
You create a side wall as a separate file and link it to the main model to use the strengths of both methods.
- 10
Door 10: inserting external components: screws and nuts
You insert standard parts such as screws and nuts from supplier catalogues to make the design realistic.
- 11
Door 11: electronic components: LEDs, transistors and resistors
You place the electronic components for the IoT house on the board: LEDs, transistors and resistors.
- 12
Door 12: PCB design: creating the layout
You plan the PCB layout: place components and route traces manually or automatically.
- 13
Door 13: 3D PCB: from 2D layout to 3D
You transfer the PCB layout into 3D, keep it in sync with the traces and fit it to the housing.
- 14
Door 14: animation: exploded views
You create exploded views and assembly animations that show how the IoT house is put together.
- 15
Door 15: rendering: photorealistic images
You set materials, lighting and background to render photorealistic images of the IoT house.
- 16
Door 16: drawings: 2D drawings, parts lists and sections
You derive 2D drawings with dimensions, parts lists and section views for manufacturing and documentation.
- 17
Door 17: CAM milling: preparing the wooden parts
You set up CAM strategies for CNC milling of the wooden parts so they fit precisely.
- 18
Door 18: 3D printing the generative design
You print the generative design with different slicers, materials and settings.
- 19
Door 19: electronics cooling simulation
You simulate the temperature distribution inside the IoT house to spot thermal problems early.
- 20
Door 20: sheet metal: an alternative to the generative design
You design an easy-to-manufacture sheet metal housing part as an alternative to the generative design.
- 21
Door 21: soldering the board
You solder the electronic components onto the board you designed and build up the electronics.
- 22
Door 22: Arduino Cloud: connecting the microcontroller
You connect the microcontroller to the Arduino Cloud to control the LEDs and other functions over the internet.
- 23
Door 23: advanced Arduino Cloud control and LED chaser
You extend the Arduino Cloud dashboard to control several LEDs individually and program an LED chaser light.
Content version 1.0.0.
Whether a workshop, a class set or a completely new training project: we will find the right model.