Skip to content
Stern Didactic GmbH

5-day workshop · Machining

DESIGN & RACE.FROM CAD MODEL TO MILLED PART.

Design, draw, program, mill, measure: on your own race car.

Request this workshop

CAD rendering of the race car in Autodesk Fusion
Duration
5 days
Result
Your own milled and measured parts
Machining
At DMG MORI where possible

Dates

In five days participants go all the way from design to the manufactured and inspected part. The basis is a race car: individual parts are designed, assembled, drawn to standard, programmed for CNC machining and then milled.

Learning objectives

Design parametrically, build assemblies, create manufacturing drawings to ISO GPS, generate CAM programs and experience the link between design, drawing and machining on a real part.

Schedule

  1. 01

    Day 1: Autodesk Fusion basics and part design

    • Getting started in Autodesk Fusion: interface, sketches, constraints, parameters
    • Designing the rim
    • Designing the chassis (start)
  2. 02

    Day 2: Assembly and manufacturing drawing

    • Finishing the chassis, optionally designing a shaft
    • Assembly: joining the parts with the existing components into the race car (components, joints, constraints)
    • Manufacturing drawing to ISO GPS: views, dimensions, tolerances, fits, surface specifications
  3. 03

    Day 3: Finishing drawings, introduction to CAM

    • Completing and checking drawings
    • Introduction to the CAM environment in Fusion: stock, origin, setup, tool selection
  4. 04

    Day 4: CAM programming

    • Creating milling operations: facing, contours, pockets, holes
    • Setting cutting data, simulation and collision check
    • Generating the NC program (post processor) and preparing for machining
  5. 05

    Day 5: Machining and measuring on site

    • Milling your own parts on the machine, at DMG MORI where possible
    • Measuring the parts and comparing them with the drawing: are dimensions and tolerances met?
    • Final review: what went well, what would you do differently in design or CAM?

Based on the training project Rennwagen.

Whether a workshop, a class set or a completely new training project: we will find the right model.

Contact