Calculator · Mechanics
TORQUEFORCE TIMES LEVER ARM.
A torque arises when a force acts at a distance from the axis of rotation. What counts is the perpendicular distance between the force’s line of action and the axis. With the calculator you can check, for example, what force is needed on a wrench.
The calculator works with formulas only. You enter values from standards, handbooks and data sheets yourself. Check results before manufacturing.
Formula
With in mm: in Nm = in N · in mm / 1000.
Force needed for a given torque.
Law of the lever
Law of the lever in equilibrium.
Quantities and units
| Torque | Nm | |
| Force | N | |
| Lever arm: perpendicular distance of the line of action from the axis | mm |
Worked example
Assembling the wind turbine: tighten M4 in aluminium to about 1.5 to 2 Nm (guide value from the project, follow the manufacturer’s data), effective lever 50 mm
Given: ,
Conversely, on the same lever gives
.Forces this small are hard to judge by hand. That is why the project provides a torque wrench for 1 to 6 Nm.
Common mistakes
- Lever arm measured at an angle: what counts is the perpendicular distance between line of action and axis.
- Millimetres not converted to metres: the result is 1000 times too large.
- Tightening by feel: small threads in aluminium strip easily.
- Attachment on the torque wrench forgotten: if it lengthens the lever, the set torque is no longer correct.
In the training project
When assembling the wind turbine apprentices define tightening torques and spot-check them with a torque wrench.
Frequently asked questions
Is Nm the same as joule?
The units have the same structure but mean different things. Torque is written in Nm, work and energy in J.
Why is a tightening torque specified rather than a preload?
Torque can be set with a torque wrench. The preload it produces also depends on friction in the thread and under the head; a tightening torque therefore only applies to the stated lubrication condition.
More calculators
Sources
- Stern Didactic: part dossier full assembly, wind turbine project