Skip to content
Stern Didactic GmbH

Calculator · Mechanics

RATIOGEARS AND BELTS.

Two gears or pulleys transmit a rotary motion. The ratio of the numbers of teeth, or of the effective diameters for belts, determines how speed and torque change. For belts the calculation assumes no slip: exact for toothed belts, approximate for V-belts and flat belts.

All calculators

Formula

  • Driven over driving. For belts use the effective pulley diameters.

  • Output speed.

  • Output torque with the stage efficiency .

  • Multi-stage

    Multi-stage gearboxes: the individual ratios are multiplied.

Quantities and units

, Teeth of driving and driven gear–
, Effective pulley diametersmm
, Input and output speeds1/min
, Input and output torquesNm
Efficiency–

Worked example

Gear stage 12 to 36 teeth, motor at 3000 1/min and 0.5 Nm, efficiency 0.95 (assumed)

Given: , , , ,

  1. Dividing head on the wind turbine: a single-start worm counts as one tooth, the worm wheel has 40 teeth, so . Three divisions need , i.e. crank turns.

Common mistakes

In the training project

Frequently asked questions

Is a large ratio faster or slower?

With greater than 1 the driven shaft turns more slowly and transmits more torque: a reduction. less than 1 is a step-up.

Does the power stay the same?

Without losses, yes: stays constant, speed and torque trade off. With efficiency , arrives at the output.

More calculators

Sources