Explanation
In the assembly drawing each item number points to a part; the parts list says what it is. Manufactured parts refer to their detail drawing; standard parts are listed with their full standard designation so that any supplier can deliver them unambiguously, e.g. a socket head cap screw ISO 4762 M4 × 10. Bought-in parts get the manufacturer's designation.
There are summarised parts lists naming each part once with its total quantity, structured parts lists showing the assembly levels, and single-level parts lists that list only the parts directly contained in each assembly. CAD programs generate parts lists from the model; whether the data are right depends on how carefully the properties are maintained.
A parts list is also a checking tool. Count checks reveal contradictions before they show up in assembly: do the number of screws and the number of holes match? Does the sum of the individual masses give the mass of the assembly?
In practice: Buggy, Buggy full assembly
The project data for the buggy assembly demonstrate two count checks. Seat and bench together have four countersunk holes, and the parts list contains exactly four M6 × 16 screws with a 90° countersunk head. The sum of the individual masses gives 1286.849 g against the stated 1286.847 g, merely a rounding difference. On the truck, mass and screw balances are part of checking the parts list.
Common mistakes
- Listing standard parts without the full designation, e.g. just "screw M4". Length, head type and property class are missing.
- Confusing the quantity per assembly with the total quantity when an assembly occurs several times.
- Not updating the parts list after a design change. Purchasing and assembly then work with an old revision.
- Listing mirror-image parts under one item. Anyone ordering or assembling from the list gets the same version twice; that is why Wheel 1 and Wheel 2 of the Mecanum rover are listed and marked separately.