Explanation
How dimensions are arranged determines the accuracy of the part. In chain dimensioning one dimension follows the next. Each has its own tolerance, and the tolerances add up along the chain. In datum (parallel) dimensioning all dimensions start from a common datum edge. Each position is then toleranced independently and errors do not add up.
Good dimensioning follows function: what must fit together is dimensioned directly to each other. At the same time it should suit manufacturing, i.e. start from surfaces the machine probes or that serve as clamping faces. Dimensions that follow from others are not entered twice; as auxiliary dimensions they are shown in brackets and are not toleranced.
For inspection and manufacturing it matters that a dimension without its own tolerance is subject to the general tolerance from the title block, while a dimension in a frame is theoretically exact and is checked via a geometric tolerance.
In practice: Truck, Truck chassis and wind turbine head
On the truck chassis the project data contrast datum and chain dimensioning and deal with the repeatability of a hole pattern. On the wind turbine head from the wind turbine project, chain dimensioning with tolerance stack-up is a learning objective in its own right. On the truck's trailer coupling the topic is datum dimensioning with overlapping dimensions and a contradictory drawing specification the apprentices are meant to find.
Common mistakes
- Entering a dimension twice, once directly and once via a closed chain. The drawing is then over-defined.
- Hiding functional dimensions in a long chain. The tolerances add up and the part does not fit.
- Dimensioning to hidden edges. Better to draw a section and dimension there.