Skip to content
Stern Didactic GmbH

Apprenticeship trade

INDUSTRIAL MECHANIC

Industrial mechanics manufacture parts, assemble them into units and machines, commission them and keep them running. The trade is one of the German industrial metal trades. Training is dual: in the company according to the training framework, at vocational school in learning fields.

German title: Industriemechaniker/Industriemechanikerin

Matching projectsLearning fields

Duration
3½ years
Final examination
extended, part 1 and part 2
Learning fields
15
Covered by projects
6

Examination

Extended final examination. Part 1 should take place before the end of the second year: a complex work task with situational discussion phases and written tasks. The subject is producing an assembly with a control function.

Part 2 at the end of training: work assignment (in-company assignment or practical task, chosen by the company), order and function analysis, manufacturing technology, and economics and social studies. Part 1 counts 40 %, part 2 60 % of the overall result.

Exam preparation with the projects

  • Part 1 requires an assembly with a control function. The Design & Make rover combines mechanics, electronics and control in one assembly and is suitable for practising how they interact.
  • Every part follows the four steps inform, plan, carry out, check. Anyone who has worked through them on several parts knows the sequence the practical exam tasks also require.
  • Every part comes with an original drawing from Autodesk Fusion. Reading the drawing, working out limits of size, drawing up a work plan and inspection plan and keeping an inspection record can all be practised on it.
  • For the technical discussion: justify decisions, for example why a fit was chosen or in which order to assemble. The AI mentor asks practice questions for self-study; it does not assess.

KMK framework curriculum

LEARNING FIELDSAT VOCATIONAL SCHOOL.

The learning fields with year and guideline hours. The last column shows which project covers the learning field in practice.

Guideline hours in lessons, 1,020 hours in total. Source: KMK framework curriculum.
No.Learning fieldYearHrsIn the project
1Manufacturing components with hand-guided toolsFertigen von Bauelementen mit handgeführten Werkzeugen1st year · 80 hours1st80Buggy
2Manufacturing components with machinesFertigen von Bauelementen mit Maschinen1st year · 80 hours1st80Buggy, Wind turbine
3Producing simple assembliesHerstellen von einfachen Baugruppen1st year · 80 hours1st80Buggy, Design & Make
4Servicing technical systemsWarten technischer Systeme1st year · 80 hours1st80
5Manufacturing individual parts with machine toolsFertigen von Einzelteilen mit Werkzeugmaschinen2nd year · 80 hours2nd80Buggy, Wind turbine, Truck, Mechanical race car
6Installing and commissioning control systemsInstallieren und Inbetriebnehmen steuerungstechnischer Systeme2nd year · 60 hours2nd60
7Assembling technical subsystemsMontieren von technischen Teilsystemen2nd year · 40 hours2nd40Wind turbine, Mechanical race car
8Manufacturing on numerically controlled machine toolsFertigen auf numerisch gesteuerten Werkzeugmaschinen2nd year · 60 hours2nd60Truck, Mechanical race car
9Repairing technical systemsInstandsetzen von technischen Systemen2nd year · 40 hours2nd40
10Producing and commissioning technical systemsHerstellen und Inbetriebnehmen von technischen Systemen3rd year · 80 hours3rd80
11Monitoring product and process qualityÜberwachen der Produkt- und Prozessqualität3rd year · 60 hours3rd60
12Maintaining technical systemsInstandhalten von technischen Systemen3rd year · 60 hours3rd60
13Ensuring the operability of automated systemsSicherstellen der Betriebsfähigkeit automatisierter Systeme3rd year · 80 hours3rd80
14Planning and implementing technical systemsPlanen und Realisieren technischer Systeme4th year · 80 hours4th80
15Optimising technical systemsOptimieren von technischen Systemen4th year · 60 hours4th60

Stern Didactic projects

WHICH PROJECT,WHICH LEARNING FIELD.

For each project the learning fields and the parts they are practised on. The information comes from the project data: drawings, materials, manufacturing processes.

Buggy – sheet metal and machining project

from the first year

  • LF 1

    Shearing, bending and deburring sheet metal parts, bending the windscreen from wire: cutting and forming with simple means.

    Parts: Rear body (shearing, bending, drilling, deburring), Seat (shearing, bending, drilling, countersinking), Bench seat (shearing, bending, drilling, countersinking), Windscreen (wire bending, cutting, deburring)

  • LF 2 LF 5

    Milling, drilling and tapping the steel chassis and aluminium engine block, turning the wheels and reaming them to ⌀6H7.

    Parts: Chassis (CNC milling, drilling, tapping, chamfering), Engine block (CNC milling, drilling, tapping, pocket milling), Wheel (turning, drilling, reaming, grooving)

  • LF 3

    Assembling the buggy with standard parts from the parts list and testing its function.

    Parts: Buggy assembly (assembly, inspection, function test)

View project · Missions in the AI mentor

Wind turbine – machining project

  • LF 2 LF 5

    Turned and milled parts in steel and aluminium, drilled, reamed and threaded, surfaces down to Ra 0.8.

    Parts: Turbine tower (turning, drilling, thread cutting), Shaft (turning, thread cutting), Hub (turning, CNC milling, reaming, drilling, thread cutting), Nacelle (CNC milling, drilling, reaming, thread cutting)

  • LF 7

    Clearance fit ⌀20H8/e8 between rotating axle and axle, and ⌀8H7 for the shoulder screw: assembling the rotor and checking that it runs freely.

    Parts: Hub (turning, CNC milling, reaming, drilling, thread cutting), Shaft (turning, thread cutting), Nacelle (CNC milling, drilling, reaming, thread cutting), Wind turbine full assembly (assembly)

View project · Missions in the AI mentor

Truck – batch production with a tolerance system

after the buggy, as the next step with tighter tolerances

  • LF 5

    Six wheels with 0.01 runout to datum A and H13 counterbores: geometrical tolerance and ISO tolerances on your own workpiece.

    Parts: Truck tyre (turning, reaming, grooving), Truck chassis (CNC milling, drilling, tapping)

  • LF 8

    Chassis, fifth-wheel plate and engine block on the CNC mill; six counterbores on a 40 ± 0.1 grid in the chassis.

    Parts: Truck chassis (CNC milling, drilling, tapping), Truck trailer plate (CNC milling, drilling, tapping), Truck engine block (CNC milling, drilling, tapping)

View project · Missions in the AI mentor

Mechanical race car – rolling bearings and ISO GPS

in the third or fourth year

  • LF 5 LF 8

    Milling the aluminium chassis with a ⌀22J8 bearing seat and envelope requirement, turning rims and axles.

    Parts: Chassis (CNC milling, pocket milling, drilling, reaming, tapping, grooving, chamfering, deburring), Rim (turning, reaming, grooving, pocket milling, drilling, chamfering, deburring), Rear axle (turning, grooving, thread cutting, chamfering, deburring)

  • LF 7

    Fitting deep-groove ball bearings and circlips, ⌀8f9 bearing seats on the axle: rolling bearings and fits in assembly.

    Parts: Rear axle (turning, grooving, thread cutting, chamfering, deburring), Race car full assembly (assembly, inspection, function test)

View project · Missions in the AI mentor

Design & Make – Mecanum Rover

  • LF 3

    Assembling the rover from the parts list: floor plate, wheel assemblies, circuit board, drive, with a dimensional check to general tolerances.

    Parts: Complete Assembly – Mecanum Rover (assembly), Mecanum wheel assembly (Wheel 1 and Wheel 2) (assembly, 3D printing)

View project · Missions in the AI mentor

AI mentor

Every project is available in the AI mentor as missions, per part with model and drawing and the four steps inform, plan, carry out, check. In the learner profile the person enters their trade and year; the mentor turns this into tasks at the right depth. It practises and explains, but never assesses and gives no grades.

How the AI mentor works

Nullpunkt

In Nullpunkt, the workshop in the browser, apprentices build Buggy and Design & Make virtually: on machines such as guillotine shear, lathe, CNC mill and 3D printer, with the original drawings. Mistakes show up when measuring and assembling, without using up material.

More about Nullpunkt

For trainers and teachers

In our workshops you build a project yourself before running it with your apprentices: Workshop Design & Make and Workshop Design & Race.

Other trades: Precision machinist · Structural metal mechanic · Mechatronics technician · Technical product designer · Electronics technician for devices and systems · Electronics technician for automation technology · Overview

For your training

Planning a project for your apprentices or your class? We match project, material and support to trade and learning field.

ContactAll projects

Sources

Checked on 18 November 2026. Learning field titles are quoted from the German framework curriculum, English titles are our translation; we do not reproduce the learning field descriptions. Each German state implements the framework curriculum in its own syllabus.