Skip to content
Stern Didactic GmbH

Apprenticeship trade

TECHNICAL PRODUCT DESIGNER

Technical product designers design parts and assemblies on the computer, create 3D data sets, drawings and parts lists, taking materials and manufacturing processes into account. There are two specialisations: machine and plant design, and product design and engineering.

German title: Technischer Produktdesigner/Technische Produktdesignerin

Matching projectsLearning fields

Duration
3½ years
Final examination
extended, part 1 and part 2
Learning fields
13 per specialisation
Covered by projects
5

Examination

Extended final examination. Part 1 should take place at the end of the second year, in the examination area “technical documents”: an examination product and written tasks, seven hours in total.

Part 2 at the end of training: work assignment, “development and design” (machine and plant design) or “product development” (product design and engineering), and economics and social studies. Part 1 counts 30 %, part 2 70 % of the overall result.

Exam preparation with the projects

  • Part 1 is called “technical documents”. Every project comes with models and drawings from Autodesk Fusion; redesigning parts, deriving a drawing and comparing it with the original is an obvious exercise.
  • Every part follows the four steps inform, plan, carry out, check. Anyone who has worked through them on several parts knows the sequence the practical exam tasks also require.
  • Every part comes with an original drawing from Autodesk Fusion. Reading the drawing, working out limits of size, drawing up a work plan and inspection plan and keeping an inspection record can all be practised on it.
  • For the technical discussion: justify decisions, for example why a fit was chosen or in which order to assemble. The AI mentor asks practice questions for self-study; it does not assess.

KMK framework curriculum

LEARNING FIELDSAT VOCATIONAL SCHOOL.

The learning fields with year and guideline hours. The last column shows which project covers the learning field in practice.

Guideline hours in lessons, 980 hours in total per specialisation. Source: KMK framework curriculum.
No.Learning fieldYearHrsIn the project
1Analysing and capturing technical systemsTechnische Systeme analysieren und erfassen1st year · 60 hours1st60
2Creating parts and assemblies to specification with computer supportBauteile und Baugruppen nach Vorgabe computerunterstützt erstellen1st year · 80 hours1st80Design & Make
3Taking the effects of selected manufacturing processes and materials into account in part designAuswirkungen ausgewählter Fertigungsverfahren und Werkstoffe auf die Bauteilkonstruktion berücksichtigen1st year · 80 hours1st80
4Carrying out orders with customer focusAufträge kundenorientiert ausführen1st year · 60 hours1st60
5Developing metal parts with regard to forming processes in the context of assembliesBauteile aus metallischen Werkstoffen unter Berücksichtigung von Umformverfahren im Kontext von Baugruppen entwickeln2nd year · 60 hours2nd60Buggy
6Developing plastic parts with regard to primary forming and forming processes in the context of assembliesBauteile aus Kunststoffen unter Berücksichtigung von Ur- und Umformverfahren im Kontext von Baugruppen entwickeln2nd year · 80 hours2nd80
7Developing parts with regard to separating manufacturing processes in the context of assembliesBauteile unter Berücksichtigung von trennenden Fertigungsverfahren im Kontext von Baugruppen entwickeln2nd year · 80 hours2nd80Wind turbine, Mechanical race car
8Developing metal parts with regard to primary forming processes in the context of assembliesBauteile aus metallischen Werkstoffen unter Berücksichtigung von Urformverfahren im Kontext von Baugruppen entwickeln2nd year · 60 hours2nd60
Specialisation Machine and plant design (MAK)
9Creating and modifying 3D data sets of assemblies with regard to joining processes and assembly techniques3D-Datensätze von Baugruppen unter Berücksichtigung von Fügeverfahren und Montagetechniken erstellen und modifizieren3rd year · 100 hours3rd100Design & Make
10Creating and modifying data sets and documentation for technical systems of automated manufacturingDatensätze und Dokumentationen für technische Systeme der automatisierten Fertigung erstellen und modifizieren3rd year · 60 hours3rd60
11Creating and modifying 3D data sets of assemblies using machine elements and purchased parts3D-Datensätze von Baugruppen unter Verwendung von Maschinenelementen sowie Kaufteilen erstellen und modifizieren3rd year · 120 hours3rd120Mechanical race car
12Creating and modifying 3D data sets of parts and assemblies to design specifications3D-Datensätze von Bauteilen und Baugruppen nach gestaltungstechnischen Vorgaben erstellen und modifizieren4th year · 60 hours4th60
13Carrying out product development with customer focusProduktentwicklung kundenorientiert ausführen4th year · 80 hours4th80
Specialisation Product design and engineering (PGK)
9Creating and modifying 3D data sets of assemblies with regard to joining processes and assembly techniques3D-Datensätze von Baugruppen unter Berücksichtigung von Fügeverfahren und Montagetechniken erstellen und modifizieren3rd year · 100 hours3rd100Design & Make
10Creating and modifying 3D data sets of parts to styling specifications3D-Datensätze von Bauteilen nach Designvorgaben erstellen und modifizieren3rd year · 120 hours3rd120
11Creating and modifying 3D data sets of assemblies using standard and purchased parts3D-Datensätze von Baugruppen unter Verwendung von Normteilen sowie Kaufteilen erstellen und modifizieren3rd year · 60 hours3rd60Mechanical race car
12Creating and modifying 3D data sets of complex assemblies from design ideas3D-Datensätze von komplex aufgebauten Baugruppen aus Designideen erstellen und modifizieren4th year · 60 hours4th60
13Carrying out product development with customer focusProduktentwicklung kundenorientiert ausführen4th year · 80 hours4th80

Stern Didactic projects

WHICH PROJECT,WHICH LEARNING FIELD.

For each project the learning fields and the parts they are practised on. The information comes from the project data: drawings, materials, manufacturing processes.

Design & Make – Mecanum Rover

  • LF 2

    Every part of the rover is designed in Autodesk Fusion: sketch, extrude, revolve, shell, mirror, circular pattern, thread.

    Parts: Floor plate (3D printing), Roof (housing cover) (3D printing), Inner wheel half (Innen1 / Innen2) (3D printing), Roller (Mecanum roller) (3D printing)

  • LF 9 MAK LF 9 PGK

    Building assemblies with rigid and revolute joints: wheel assembly with angled rollers, the whole rover as a model.

    Parts: Mecanum wheel assembly (Wheel 1 and Wheel 2) (assembly, 3D printing), Complete Assembly – Mecanum Rover (assembly)

View project · Missions in the AI mentor

Buggy – sheet metal and machining project

from the first year

  • LF 5

    Sheet metal parts with flat patterns: with the sheet metal rule’s K-factor of 0.44 the rear body comes to 170.52 mm, with the DIN 6935 correction value to 170.16 mm. Bend radius and springback shape the design.

    Parts: Rear body (shearing, bending, drilling, deburring), Seat (shearing, bending, drilling, countersinking), Bench seat (shearing, bending, drilling, countersinking)

View project · Missions in the AI mentor

Wind turbine – machining project

  • LF 7

    Turned and milled parts whose drawings specify ISO fits, roughness and a DIN 76-A thread undercut: deriving form and accuracy requirements from the function.

    Parts: Turbine tower (turning, drilling, thread cutting), Shaft (turning, thread cutting), Nacelle (CNC milling, drilling, reaming, thread cutting)

View project · Missions in the AI mentor

Mechanical race car – rolling bearings and ISO GPS

in the third or fourth year

  • LF 7

    Drawings to DIN EN ISO 14405 with the envelope requirement, ⌀22J8 (E) bearing seat in the chassis.

    Parts: Chassis (CNC milling, pocket milling, drilling, reaming, tapping, grooving, chamfering, deburring), Rim (turning, reaming, grooving, pocket milling, drilling, chamfering, deburring)

  • LF 11 MAK LF 11 PGK

    Deep-groove ball bearings and DIN 471/472 circlips as purchased parts in the assembly, ⌀8f9 bearing seats on the axle.

    Parts: Rear axle (turning, grooving, thread cutting, chamfering, deburring), Race car full assembly (assembly, inspection, function test)

View project · Missions in the AI mentor

AI mentor

Every project is available in the AI mentor as missions, per part with model and drawing and the four steps inform, plan, carry out, check. In the learner profile the person enters their trade and year; the mentor turns this into tasks at the right depth. It practises and explains, but never assesses and gives no grades.

How the AI mentor works

Nullpunkt

In Nullpunkt, the workshop in the browser, apprentices build Design & Make and Buggy virtually: on machines such as guillotine shear, lathe, CNC mill and 3D printer, with the original drawings. Mistakes show up when measuring and assembling, without using up material.

More about Nullpunkt

For trainers and teachers

In our workshops you build a project yourself before running it with your apprentices: Workshop Design & Make and Workshop Design & Race.

Other trades: Industrial mechanic · Precision machinist · Structural metal mechanic · Mechatronics technician · Electronics technician for devices and systems · Electronics technician for automation technology · Overview

For your training

Planning a project for your apprentices or your class? We match project, material and support to trade and learning field.

ContactAll projects

Sources

Checked on 18 November 2026. Learning field titles are quoted from the German framework curriculum, English titles are our translation; we do not reproduce the learning field descriptions. Each German state implements the framework curriculum in its own syllabus.